1710 series one-component thermal conductive silicone gel
Features and advantages:
The 1710 series thermally conductive silicone gel, also known as thermally conductive putty, thermally conductive mortar, etc, is made of silicone resin as the base material, added with thermally conductive fillers and bonding materials.
Thermally conductive silicone gel has excellent high and low temperature resistance, low mechanical stress and high compression deformation. Performance, excellent weather resistance, radiation resistance and superior dielectric properties, no volatiles.
Thermally conductive silicone gel is suitable for filling the surface gaps of various microwave devices such as microwave communication, microwave transmission equipment, microwave special power supply, stabilized power supply, etc., and provides excellent thermal conductivity for electronic components that generate heat.
|Thermal conductivity||2.1W/MK||3.0W / MK||3.6W / MK||4.5W/MK||5.0W / MK||6.0W / MK||7.0W / MK||8.0W / MK||ASTM D5470|
|Minimum filling thickness||0.05 mm||0.05 mm||0.05 mm||0.05 mm||0.05 mm||0.05 mm||0.05 mm||0.05 mm||ASTM-D374|
|Glue output (0.6 atm/60S)||50-80 g||50-80 g||50-80 g||50-80 g||50-80 g||50-80 g||50-80 g||50-80 g||/|
|Specific gravity (±0.2)||2.42g /cm3||2.85g /cm3||3.02g /cm3||3.09g /cm3||3.30 g / cm 3||2.92g /cm3||3.08g /cm3||3.13g /cm3||ASTM D792|
|Breakdown voltage (1mm, AC)||≥5 KV||≥5 KV||≥5 KV||≥5 KV||≥5 KV||≥5 KV||≥5 KV||≥5 KV||ASTM-D149|
|Operating temperature||-40~200 °C||-40~200 °C||-40~200 °C||-40~200 °C||-40~200 °C||-40~200 °C||-40~200 °C||-40~200 °C||EM344|
|Volume resistance||10 12 Ω · CM||10 12 Ω · CM||10 12 Ω · CM||10 12 Ω · CM||10 12 Ω · CM||10 12 Ω · CM||10 12 Ω · CM||10 12 Ω · CM||ASTM-D257|
|Viscosity||/||/||/||/||/||160-200 Pa.S||150-180 Pa.S||150-180 Pa.S||/|
|Note: The data recorded on this website are representative values rather than guaranteed values. To improve product performance, specifications are subject to change without notice. The use of the product recorded in this website is just an example. The product can have a variety of different application scenarios and environments, which are beyond our control. Therefore, whether the product is suitable for your production process and conditions, you need to make full use of it before using it. Evaluate to confirm whether its performance and effect are in line with expectations. For applications that need to be considered safe, please test and confirm their safety in advance. In addition, the company does not guarantee that the purposes recorded on this website will not infringe any patents. Before using this product, please carefully read the explanatory text and safety data sheet (MSDS) marked on the main body of the product. This product is manufactured for general industrial applications. Do not use for medical purposes.|
The product may precipitate during storage. This is a normal phenomenon. Please mix well before use and strictly follow the product storage and transportation instructions. In order to obtain the best performance, the bonding surface should be clean, dry and free of grease. For high-strength structural bonds, special surface treatment can increase bond strength and durability. The material taken out of the container may be contaminated during use. Do not put the material back into the original container. Kingbali® cannot be held responsible for products that are contaminated or stored under non-instructed conditions.